Got Questions? Standards Have the Answers
October 19, 2023 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
The I-Connect007 Editorial Team recently spoke with Gerry Partida, vice president of technology at Summit Interconnect, and co-chair of the IPC-6012 committee. Gerry has been involved with standards development for years, and he believes that adhering to IPC’s standards and specifications has been a big part of Summit’s success.
In this interview, Gerry explains how Summit utilizes standards, manufacturing data, and information to reduce re-spins and scrap while increasing yield and profitability. He also discusses the repercussions that can occur when designers don’t follow IPC standards. As Gerry points out, everything you need to know is in the standards, so why not follow them?
Nolan Johnson: Gerry, we’ve spoken before about Summit’s use of manufacturing data, including microvia modeling. Tell us about how this all works with DFM rules and IPC standards.
Gerry Partida: Yes, we try to use data and information to make good decisions. We’ve been talking over the last couple of years about modeling microvia reliability. But we also use our ERP systems to collect data, and then look at that data for our yields. If there’s a defect, we can track it to see what has caused it. Then if we buy new equipment to solve and bring that defect rate down, we can track it to see whether our investment is going through to work it out. COO Sean Patterson believes that we are a technology company that owns board shops, so we want to use technology and the tools available to manage and do things in an intelligent manner.
Traditionally, the board industry would just do another re-spin and not analyze what is working and what is not, what the yields are, etc. At times I'll get a very challenging design from a customer who didn't follow IPC rules, and we’ll say, “No, this is not to the reliability that you require.” They’ll reply, “We've been getting these boards built for years,” and I’m thinking, “I understand what you're saying. You've been receiving good boards, but you do not know what is happening to make the quantity of your good boards.” Their fabricator may have had to throw away 50% or 75% of the boards that they produced to get that 100% deliverable.
To read this entire conversation, which appeared in the October 2023 issue of Design007 Magazine, click here.
Suggested Items
It’s Only Common Sense: The Best Cold Calling Ideas of All Times
05/27/2024 | Dan Beaulieu -- Column: It's Only Common SenseHow many times have you heard that cold calling is dead? How many salespeople have given up trying to reach people they do not know and sell them something they think they do not want? Well, that is the biggest bunch of malarky out there right now. It is more like wishful thinking by salespeople who hope to be let free of what they think is the despicable act of calling people up. Now, get into that frame of mind as you start calling potential customers.
The Thrill of Victory: IPC Design Competition
05/23/2024 | Michelle Te, I-Connect007The final heat of the 2024 IPC Design Competition took place on Tuesday, April 9, during IPC APEX EXPO. IPC’s Kris Moyer and Patrick Crawford served as judges and onsite supervisors for the event, which featured five competitors—four online and one live at IPC APEX EXPO. The grand prize winner was Dinesh G., followed by Paul Brionez in second place (he placed third last year), Ajeesh Francis in third, and runners-up Joseph Chiu and Harish G (last year’s champion).
EWPTE 2024 Draws Nearly 3,000 Attendees
05/23/2024 | WHMAThis year, the cable and wire harness manufacturing industry came to “harness the future” at the Electrical Wire Processing Technology Expo (EWPTE), held May 14-16 at Baird Center in Milwaukee, Wis., and left inspired with access to new technologies, and solutions to challenging issues through training and education and a network of leading-edge companies, industry leaders and subject matter experts.
Catching Up With TapRen Tech Solutions’ Tristan Ren
05/21/2024 | Dan Beaulieu, D.B. Management GroupI am always looking for companies that develop new and innovative ways of doing things, so I was delighted when I got a call from Tristan Ren, who wanted to tell me about his new company TapRen Tech Solutions. As I talked to “Ren,” I realized this was not your normal value-added broker. (I know everyone hates that term but that’s what many of these companies are.)
Marcy’s Musings: The ‘Magic’ of Additive Processes
05/21/2024 | Marcy LaRont -- Column: Marcy's MusingsThough modern semi-additive and fully additive technologies are still emerging for PCB manufacturing, additive technology itself is not new. Many PCB fabricators find themselves at a crossroads when deciding whether to change their current processes and go additive or stay the course until something significant compels a change. But change is on the horizon, and it seems to be driven by significant technological advancements in chips and advanced packaging, offering PCB fabricators some additive manufacturing solutions to explore.